How to Program for using Universal remote of DTH's with Your TV Set?

How to Program for using Universal remote of DTH's with Your TV Set?

Tata Sky/Airtel Digital TV offering Universal Remote with their Set-Top box to get rid-off from the need to hold two remotes in hand to operate TV & STB. Now, with the help of this Universal Remote we can operate both with single remote in hand but to avail this facility firstly we need to configure Universal remote with our TV remote.

Note: Airtel Digital TV/ Tata Sky both allow to program following only 5 buttons listed below

1. Power On/Off

2. Volume Up

3. Volume Down

4. Mute

5. TV Sources AV/HDMI/USB

Steps to program Universal-Remote are:

1. Press Button (OK) in Airtel Digital TV's Remote / Button (Select) in Tata Sky Universal Remote +     Button (2) simultaneously to start remote in  learning mode. LED on Remote will blink twice to         indicate that Remote in now in learning mode.

2. Now Press Volume Up button on STB Remote and place the universal remote and your TV remote     in front of each other i.e. their signal LED should face each other. Make sure the distance between     both remote LED must be between 5 cm. and then press Volume Up button of TV Remote. LED         again will blink twice to show that button is programmed successfully

3. If LED on remote blink 4 time then repeat steps 1,2 again until you get success.

4. Repeat steps 2 for all five button one by one according to your need.

5. At last, Press again Button(OK) / Button (Select) to save settings.

now u can simply operate both TV/ STB with single remote  to operate both TV/STB.